Aerospatiale AS350 repainted in CPair Regional colours
**************************************************************************************************
The Aerospatiale AS350 is a widely used in the world today. It has much popularity and has a variety
of uses for it. Given the benefits and advantages CPair decided to make it the first chopper in our
fleet and the first addition to the "CPair Regional" department. CPair is growing everyday and you can
become a part of our growth by visting CPair's website at htpp://s8.invisionfree.com/Canadian_Pilots/ .
This repaint requires Peter Nemeth and his team's Aerospatiale AS350. To install this repaint follow
these steps.
1. Navigate to and open your "AS350 Ecureuil" folder" which should be located in your main aircraft
folder.
2. Drop the "texture.cacp_regional" folder inside the "AS350 Ecureuil" folder.
3. Open the aircraft.cfg with a word editor. I recommend using Microsoft Notepad as that is the easiest.
4. Once in the aircraft.cfg scroll down to the last "[fltsim]" section. Add the following lines of code
underneath it and change the "xx" to the next chronological number.
[fltsim.xx]
title=Eurocopter AS350 Ecureuil Canadian Pilots Regional
sim=AS 350
model=
panel=
sound=
texture=cacp_regional
kb_checklists=
kb_reference=
ui_manufacturer=CPair
ui_type=AS 350
ui_variation=CPair Regional
prop_anim_ratio=-1.86
atc_id=CACP-R
description=The Aerospatiale AS350 repainted in CPair Regional colours by Ludo Lambrechts. This is the first helicopter in the CPair fleet and the first addition to the CPair Regional department. CPair can be visited and joined by going to the Canadian Pilots website. The AS.350 was developed by Aerospatiale in the early 1970s, an Avco Lycoming powered prototype first flying on 27 June 1974, followed by a Turbomeca Arriel version on 14 February 1975. Customer deliveries of the Ecureuil (Squirrel) began in April 1978.\nThe Ecureuil was intended to replace the Alouette, and to compete with the Bell 206. The type represents one of Europe's most successful civil helicopter designs, and has found numerous overseas markets. It was also produced as the AS.550 Fennec military helicopter.\n
atc_heavy=0
atc_airline=
atc_flight_number=
Thank you for downloading this texture. A special thanks to Peter Nemeth, Tamas Nemeth, and Batki Zoltan
for their hard work on this helicopter.
If there are any problems or issues with this repaint e-mail me at ludo_626@hotmail.com or visit
http://s8.invisionfree.com/Canadian_Pilots .
CPair can be visited and joined by heading to http://s8.invisionfree.com/Canadian_Pilots/ .
Repainted by Ludo Lambrechts
Installation:
-Extract the ZIP file
-Copy the "AS 350 Ecureuil" folder to "FS9\Aircraft" directory
-copy the files from gauge folder to "FS9\Gauges" folder
-Enjoy
Model by Tamas Nemeth and Peter Nemeth (pencee@vnet.hu).
Repaints by Batki Zoltan and Tamas Nemeth
2D main panel background by Batki Zoltan.
Some of the gauges included in these files were designed by various authors and distributed as freeware.
We respect your work. If you do not add your permission please contact us.
All files is freeware and not to publish for credit or any commercial use.
Any information about the aircraft is awaited by the authors for further development.
